Using Jumpers To Fix A Home Button

by George Lovell | | 0 comments

We often see torn cables on components such as iPhone home buttons, especially after DIY repair. 

Time to run some "jumper wires". 

By soldering ultra thin (0.02mm) copper wire on to the trace, we can re-establish continuity in the circuit, and thus salvage the component. -

A small layer of green solder mask is then applied and cured under UV light to protect the newly exposed traces from damage and corrosion.

Thanks for reading!

See Our Blog for the latest industry news, tech tips, company updates, and anything else we feel like writing about. 


Leave a comment